6. series (aluminium): Bottom bracket 68 mm BSA;
8. series (carbon): Bottom bracket 86,5 mm Press Fit;
Both use the same headset with integrated cable routing: IS52/1 1/8" a the top and IS52/1.5" at the bottom;
For more, see the exploded drawings: ATLAS 8. series MY23
ATLAS 6. series MY23

180 mm front / 160 mm rear

Our bikes are compatible with Shimano's GRX system with maximum 46/31 teeth combination and with groupsets from Sram with up to 43/30 teeth combinations.

6. series (aluminium) frame maximum: For 700c wheels, it is 47 mm.
8. series (carbon) frame maximum: For 700c wheels, it is 45 mm.
If you use 650B wheels, it is 2.1" (53 mm).

We designed the ATLAS around 700c wheels. With the generous tyre clearance of the frame allowing you to run up to 47 mm wide tyres with the ATLAS 6. series (aluminium) and 45 mm with the ATLAS 8. series (carbon), there's not much of a reason to opt for 650B wheels. You can run them with tires of up to 53 mm though. Just keep in mind, that this will reduce the bottom bracket height and alter the riding characteristics slightly.

Theres's no limit for seat post length. This means you can choose a smaller frame to fit your shorter torso length, even when you have long legs. Just be aware when choosing a seat post, that there is a minimum of 10 cm insertion needed.
You also have to keep the maximum seat post insertion of your ATLAS in mind. These are the maximum seat post insertion lengths for the different frames and sizes:
Maximum seat post insertion for 8. series (carbon): XS: 200 mm, S: 200 mm, M: 230 mm, L: 260 mm, XL: 300 mm.
Maximum seat post insertion for 6. series (aluminium): XS: 220 mm, S: 250 mm, M: 285 mm, L: 315 mm, XL: 340 mm.

The total weight limit is 120 kg for the ATLAS. It includes the weight of the rider, the bike and all equipment.

Yes, we especially prepared the ATLAS to have this option.

Yes, it's possible, but it depends on the model and series, plus you have to keep dimensions in mind.
For the 6. series (aluminium), we offer plenty of options: We have a fender set (accessory Art.Nr. 311030700) and rack (accessory Art.Nr. 313029700) combination. Here is how to install it: Carrier + Fender Assembly
You have to be aware that you can use these fenders only in combination with the rack. You also have to use smaller tyres (maximum 40 mm/700x40c) to fit all our fender sets. To mount a kickstand (18 mm distance between holes), we provide an adapter (accessory Art.Nr. 212000000) that can be attached below the dropout. We also offer already fully equipped 6. series bikes (EQP) in our portfolio.
All these options don't apply for the 8. series (carbon). There is no option for a regular stand or rack. But you can use our Adventure Rack (accessory Art.Nr. 313029000) and fender set (accessory Art.Nr. 311038100).
You can order all parts via your local dealer.

Yes, both are possible. We even have different spec versions offering those two options. Some of our ATLAS models come with a minimalist setup with one chainring and no front derailleur. And others are fitted with two chainrings for a wider range of gears. This comes in handy when you are riding with more bags and tend to be drawn to the mountains.

If you want to change from Shimano to another Shimano GRX crankset, the maximum teeth combination you can use is 46/31. If you want to change from Shimano to Sram or the other way around, you also have to change the bottom bracket. The maximum teeth combination for Sram is 43/30.

Yes, both is possible.

The bike's frame provides three mounting options for bottle cages. One bottle cage can be screwed at the seat tube and two more at the down tube – one above and one below. The fork offers the option to additonally have one bottle cage each side.

Have a look at the exploded drawing to see how it works in combination with your stem: C.I.S. stems
You can order the computer mount via your dealer (accessory Art.Nr. 998057400) and he will help you install it. To additionally attach an action cam or light, you have to order the GoPro mount (accessory Art. Nr. 998027400).

You can change to any standard 1 1/8" stem or opt for another length of our C.I.S. stem. To learn more about how to change to a standard stem, please see the respective question in our FAQ. Regarding our C.I.S. stem,, we offer the stem in six lengths from 70 to 120 mm and you can use it on both 8. (carbon) and 6. series (aluminium). Aditionally, you can adjust the handlebar height with special two-piece spacers. Please see the manual (C.I.S Road Stem) and exploded drawing (C.I.S. stems) and ask your local dealer for help.

Please see the manual (C.I.S Road Stem) on page 7. You can adjust the handlebar height with our special two-piece spacers. If in doubt, please ask your local dealer for help.

Yes, you can mount any stem you want. You only need a new headset cover from Acros. This is the headset cover you need when converting to a regular stem: Acros is52 headset cover ICR
For (more) spacers this is the fitting set: Acros spacer-set, fiber, od34
Please be aware that you have to dismount your brake lines and shifter cables to do convert to a regular stem. When changing the headset cover, grease the bearings to extend the lifetime of your headset. If you want to upgrade the bearings, here is a stainless steel option: is52/is52 bearing kit ICR:Acros is52/is52 bearing kit - integrated cable routing
The whole process is similar to the one described in the following video. The only difference: You can skip the part with the cables going through the stem as yours running underneath the stem: FOCUS C.I.S. cockpit change

You can order it via your local dealer (accessory Art.Nr. 998057400). You can easily attach your Wahoo or Garmin to the ATLAS C.I.S. stem with this computer mount. To additionally attach an action cam or light, you have to order the GoPro mount (accessory Art. Nr. 998027400). See the exploded drawing for more: C.I.S. stems

Yes, that is possible. As all cables run into the headset close to your current stem, you can mount our C.I.S. stem. You need to get the new stem, rear cover + ahead cap, 5 mm + 10 mm spacer, cable holder, face plate and bearing cap for the ATLAS from your local FOCUS dealer. Let him or her change it. Please see the manual together, ask your local dealer for help and let him or her change your stem.
C.I.S Road Stem Manual
C.I.S. Stem Exloded Drawing

Our fork was not designed to be used with a front rack. We advise against an assembly of such a front rack.

The sizes vary a lot depending on the bag brand. We recommend checking the bag brand's website. Often, they offer stencils to check if it fits the frame.

You can use our aluminium ATLAS (6. Series) on a smart trainer. The carbon frame (8. series), we did not test yet and therefore can not approve it for the time being.

For the 6. series (aluminium frame), we can give you the permission to use a bike trailer that is attached to the thru axle as long as you don't exceed the maximum system weight of 120 kg (rider, bike, passengers and all equipment including the trailer). For the 8. series (carbon frame), we did not test it yet and therefore can not approve it.

You can load up to 3 kg on each side of the fork. Three screws each side offer the option to install bottle cages or racks for further luggage.

That's our Adventure Rack. You can order it via your local dealer with this accessory number: Art.Nr. 313029000.

Our Adventure Rack (accessory Art.Nr. 313029000) is a new rear rack for the ATLAS that you can order via your local dealer. Check out this page for pictures how to use it. Here is how to install it: ATLAS 8. series MY23

It should be mounted to the seat stay bridge and the mounting points close to the dropout. Check out the manual: ATLAS 8. series MY23

The best way to store your luggage on the Adventure Rack is by using dry bags with valve and fixing them with three straps.

You can load up to 3 kg on each side.

It is included for ATLAS 8.9, 8.8, 8.7 and 6.8. For the other models, you can order it via your local dealer (accessory Art. Nr. 551000000).

The Thread Insert is made to install a light or something small, similar to a light. It should not be used for bigger loads and is therefore not designed to attach a front rack to it.

Judging a damage from the outside or based on a picture is almost impossible. In case of damage, please visit your local dealer.